Launch our Cool Free App!

Enjoy App-Exclusive Deals.

Launch App
Tronxy Acrylic P802 - MHS 3D Printer
Tronxy Acrylic P802 - MHS 3D Printer
Tronxy Acrylic P802 - MHS 3D Printer
Tronxy Acrylic P802 - MHS 3D Printer
Tronxy Acrylic P802 - MHS 3D Printer
1/1

Tronxy Acrylic P802 - MHS 3D Printer - Black US Plug

Rs15433.49
217.24
69 Reviews

Coupon:

Promotion:

Support COD payment

Warehouse & Fee

Select
CL-ED:Ship between: Oct 17 - Oct 19

Product Options

Select
Black US Plug
Visit Store

Reviews (69)

Jam 3D print Studio
Jan 06,2019
After two Years of using I can say it worth it!I changed the linear Bearing to Igus-bearings and they were much more quiet and precise.The Mainboard needs also cooling, because it was to hot (around 90°C says my therminal camera).After after those two little changes it's my favorite printer.I worked on several delta printer (I dont like any of them), Pusa i3 MK3 MM2 and Renkforce RF500.The Prusa is better, for sure, but for the most prints I use this one. I had NO! Jamming issues and the first nozzle. With some changes in the G-code it's possible to change the Filament for some Layers to get Mulicolor Prints and I really like the results (see the pictures).I would buy it again, but change the bearings and put on the fan on the Mainboard right in the first place. By the way the Manuall is not good because there were two and you had to check both in the same time.That was a little confusing...
View More

Description

Disclaimer:
● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Modification and customization of the 3D printer are strictly forbidden. We will take no responsibility for any problems resulting from modifications.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.

Tronxy Acrylic P802 - MHS 3D Printer 3 Dimension Printing Machine

Description:
You are still looking for a 3D printer but hard for you to make a decision? You won't be hesitate anymore if you've seen this Tronxy Acrylic P802 - MHS 3D Printer. It is a best choice for 3D DIY enthusiast.

Main Features:
● Support Off-line printing, it is specially convenient when without computer.
● LCD screen shows you printing information directly and is easy for you to manipulate.
● Cooling fan speeds up solidification of the extruded filament.
● Desktop 3D printer, convenient to operate.
● Metal steel material, more stable and durable.
● A good machine for 3D DIY enthusiast.
Note: the power appearance, please in kind prevail.

Specification

Custom

XY Axis Speed: 3000mm/min
Z Axis Speed: 200mm/min

General

Brand: Tronxy
Model: P802 - MHS
Type: DIY
Nozzle quantity: Single
Nozzle diameter: 0.4mm
Nozzle temperature: 170-275 Degree
Product forming size: 220 x 220 x 240mm
Layer thickness: 0.1-0.4mm
Memory card offline print: SD card
LCD Screen: Yes
Print speed: 40 - 120mm/s
Platform temperature: Room temperature to 110 degree
Supporting material: ABS,PLA
Material diameter: 1.75mm
Language: Chinese,English
File format: G-code,OBJ,STL
XY-axis positioning accuracy: 0.012mm
Z-axis positioning accuracy: 0.004mm
Voltage: 110V/220V
Host computer software: Repetier-Host
Packing Type: unassembled packing

Dimensions and Weight

Product weight: 9.0000 kg
Package weight: 9.1000 kg

Package

Contents

1 x Wire Cutter

1 x Framework (Left)

1 x Wire Bag 

1 x Framework (Right)   

1 x Allen Wrench 

1 x Base Frame Holder (Front) 

1 x Cross Head Screwdriver

1 x Base Frame Holder (Back) 

1 x Acrylic Gadget

1 x Gantry Framework 

1 x Tweezers 

2 x Framework Holder (Top) 

1 x Flat Blade Screwdriver

1 x Y-axis Motor Holder 

1 x Rack Shelf Stack Fixed Cross Bar

1 x Main Board

1 x Master Piece of Printing Hot Bed  

1 x Left Button

1 x Right Button

2 x Screw Set  

1 x USB Cable  

1 x Rack Shelf Stack Cross Bar  

1 x Power Cable 

1 x Z-axis Motor Holder  

1 x Loincloth  

2 x Z-axis Rod 

2 x Y-axis Rod 

2 x X-axis Rod  

2 x Z-axis Screw

2 x Base Frame Holder Screw

1 x Print Head Set 

1 x On / Off Switch 

1Y-axis Motor  

1X-axis Motor

2 x Z-axis Motor  

3 x Slider 

1 x Fan

1 x Y-axis Leather Module


1 x Control Board

1 x 8G Memory Card

( Built-in Installation Video and Drive Electronic Manual )


Tronxy Acrylic P802 - MHS 3D Printer with LCD Screen- Black US Plug

Tronxy Acrylic P802 - MHS 3D Printer with LCD Screen- Black US Plug

Tronxy Acrylic P802 - MHS 3D Printer with LCD Screen- Black US Plug

Tronxy Acrylic P802 - MHS 3D Printer with LCD Screen- Black US Plug

Tronxy Acrylic P802 - MHS 3D Printer with LCD Screen- Black US Plug

Tronxy Acrylic P802 - MHS 3D Printer with LCD Screen- Black US Plug

Tronxy Acrylic P802 - MHS 3D Printer with LCD Screen- Black US Plug

Tronxy Acrylic P802 - MHS 3D Printer with LCD Screen- Black US Plug

Disclaimer:
1. Please read and follow the user manual carefully before you assemble or operate the 3D printer.
2. Modification and customization of the 3D printer is strictly forbidden. We will take no responsibility for any problems resulting from modifications.
3. Always use the correct AC voltage for your region.
4. Please do not place the the 3D printer near flammable/combustible materials, or any heat sources.
5. Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.

Recommended Products

Sponsored Products

New Member's Bonus: $50 Coupon
Rs15433.49

Tronxy Acrylic P802 - MHS 3D Printer

Color

Size

Quantity - +
installments: choose
loading...
loading...
cancel
loading...
loading...
loading...

Reviews

4.8 *****
  • 58
  • 10
  • 0
  • 0
  • 1
  • All ( 69 )
  • ( 42 )
  • ( 11 )
Jam 3D print Studio
Jan 06,2019
After two Years of using I can say it worth it!I changed the linear Bearing to Igus-bearings and they were much more quiet and precise.The Mainboard needs also cooling, because it was to hot (around 90°C says my therminal camera).After after those two little changes it's my favorite printer.I worked on several delta printer (I dont like any of them), Pusa i3 MK3 MM2 and Renkforce RF500.The Prusa is better, for sure, but for the most prints I use this one. I had NO! Jamming issues and the first nozzle. With some changes in the G-code it's possible to change the Filament for some Layers to get Mulicolor Prints and I really like the results (see the pictures).I would buy it again, but change the bearings and put on the fan on the Mainboard right in the first place. By the way the Manuall is not good because there were two and you had to check both in the same time.That was a little confusing...
dESK0
Feb 22,2017
Primera compra en Gearbest y mas satisfecho imposible. La impresora peca de algunos males menores facilmente subsanables, pej añadiendo un tensor en el eje Y la calidad de las piezas aumenta de un modo impresionante evitando unas vibraciones muy molestas en la cama caliente. El sensor de fin de carrera del eje X queda muy muy cerca de la varilla estriada y hay riesgo de rotura del cable, con una simple brida se evita sin problemas. Por lo demás me parece una impresora genial, muy fácil de utilizar y ya desde la segunda o tercera impresión se consiguen unos resultados muy buenos. La calidad de los materiales es en general muy buena, en especial el extrusor está muy bien fabricado.
Suggestion:
El montaje puede llegar a ser un tanto complicado, en especial porque en las instrucciones hay algunos pasos poco claros, incluso hay alguna imagen del montaje en la que la muestra está mal colocada, llevando a confusión. Es de agradecer que la PSU lleve ventilador incorporado para mantener la temperatura a raya, pero es excesivamente ruidoso.
Dmitriy Antonov
Apr 17,2017
Pretty nice printer. After some modifications it can print up to 0.05mm layer. Good electronic components, motors etc. Very usefull options as Pause Print etc. I recomment to print several upgrades to make frame more stable. And buy a Bowden kit (u can buy it here, on Gearbest price is very good - just search 3Ed v6). Also, the best price is here, on Gearbest. I attached some fotos and exapmle of printed part of the printer
Suggestion:
It needs to be upgraded otherwise frame will be not stable.
Stagni
Dec 16,2016
Premetto che è la prima stampante 3D Premetto che un pò di elettronica la mastico. Premesso questo, il montaggio ha richiesto un paio di serate. Accesa la stampante è andato tutto al primo colpo. Le istruzioni e i primi file di prova sono all'interno di una SD card che viene spedita assieme all'imballaggio. Anche l'imballo è gestito molto bene. Di fatto è un modello replica delle Prusa. Funziona sia con Windows che con Linux (utilizza il SW repetier). Col Mac non so. Il prezzo è veramente interessante.
Suggestion:
Se non si è un poco pratici con meccanica ed elettronica non è proprio come montare i giocattoli dell'ovo di Pasqua. D'altronde ci sono sia i filmati che le istruzioni di montaggio in PDF. Non precisissime, ma se si arriva in fondo è una soffisfazione! Montaggio un pò complicato
Impresora 3D
Oct 01,2016
La impresora me ha llegado por correos en tan solo 11 dias. Perfectamente empaquetada. El contenido es el que indican, es mas, vienen hasta tornilleria de mas. La calidad del acabado de las piezas es inmejorable. Echas un buen rato en montarla, pero siguiendo las instrucciones y después de algún fallo la terminas. Al enchufarla funciona a la primera, todos los motores, los finales de carrera, una gozada. No he imprimido nada aún, pero por los vídeos que he visto funciona correctamente. Por 135€ ha sido una compra perfecta. La verdad es que Gearbest hasta ahora me ha sorprendido por su calidad de servicio y rapidez.
Suggestion:
Deberían incluir alguna fotografía de la máquina montada para poder fijarnos como va montada, sobre todo los cables.
Sergey
Feb 24,2017
Качество принтера и деталей - на высоте. На сборку не спеша ушло пол дня, винтиков продавец ложит с достаточно большим запасом, что позволяет не беспокоиться о том что чего-то не хватит. После сборки - принтер сразу же запечатал с отличным качеством даже без доработок.Принтер однозначно стоит того что бы его купить. В дополнение ко всему он выглядит привлекательно. Такой не стыдно поставить на видном месте.
Suggestion:
Акриловый стол
Newton Worrell
Mar 02,2016
3d printing is fast becoming the new normal so I decided to jump on this sweet bandwagon!! No regrets so far! Keep in mind that I come from a hobbyist/IT tech background so the actual setup was not too difficult for me. YMMV. There's a lot to learn and absorb but it's very rewarding to see this printer working as it should. After everything is ready to go, there's also the levelling and setup. Can't skip any skeps if you want this done right, folks.
Suggestion:
Happy so far, so no complaints
Jose
Jun 22,2017
I had no exp w 3d printing..none.. learning curve.. would exist regardless of printer model or price. This printer is not "pretty" or fancy, no bells and whistles.. it gets the job done and provides what you put into it. The printer is versatile and can be modded. It's a workshop printer, not something you place in your living room like a pretty lamp.. Work this thing, it's a tool.
Suggestion:
Z access mount was slightly warped. Solution was to loosen screw on mount.. then I just printed a replacement...better than original, BLAM!
darren zochowski
Oct 09,2016
it's inexpensive great for a beggars budget prints are turning out awesome. And has more features than is described in the discretion. the presets seem to be spot on for pla. And leveling it is not bad at all. only took around 4 hour to assemble. also works with all the slicer programs that I have used.
Suggestion:
heat bed is off by 17 degrees Celsius so keep that in mind for abs.
Marc
Jul 16,2018
Montée en une journée, ça a été un vrai plaisir.. La structure est rigide (mais pas assez)les colis est arrivé bien emballé la machine imprime bien apres calibration, parfait pour debuter dans l'impression 3d sans se ruiner.apres un an d'utilisation je suis toujours aussi satisfait.
Suggestion:
pas assez rigide
View More
View More
View More